EK-FB ASUS Z270E Strix RGB Monoblock - Nickel
  • EK-FB ASUS Z270E Strix RGB Monoblock - Nickel

EK-FB ASUS Z270E Strix RGB Monoblock - Nickel

型番: WBE1003

16,921 

(18,275  税込)
3 個

説明

チップセット用水枕

ASUSR Z270 motherboards専用のフルカバー水枕(CPU込み)

銅製ベースプレート(ニッケル仕上げ)・アクリル樹脂製トッププレート

フィッティングは別売りとなっております

接続口:G1/4

互換性チェック

インストラクションマニュアル

 

特記事項
EK Waterblocks製Full Cover水枕にてベースプレート側の取り付けねじ穴が緩かったり位置がすれている等の場合は固定ネジを無理にねじ込まないで直ぐに当店へご連絡下さい、 無理にねじ込んだ結果ねじ穴のメッキが剥がれた場合はねじ穴不良のメーカー保証が無くなります(メーカはメッキが剥がれた事で無理にねじ込んだと判断して います、当店でも保証致しかねます)。装着前にまず規定のネジがスムーズにねじ込めるかを確認の後に装着作業を始めて下さいます様お願い致します。

フルカーバー水枕は各機種ごとに個別に設計されていますがリファレンス基盤の標準的な配置を元に製造設計されております。
これは固定ネジの配置や各チップの位置が同じと言うだけでありチップキャパシタやチップレジスターは製造ロットによって採用しているチップパーツが違い、高さなどが微妙に異なる可能性がありチップパーツが水枕に接触する可能性があります。
従いましてFull Cover水枕を被対象物に装着する時には不必要な箇所の接触が無いかを必ず確認して下さい、接触が有る場合はその部分を削ったり絶縁材を挟む必要がございますので予めご了承下さい。

EAN: 3831109821701

 

EK-FB ASUS Z270 Strix RGB Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for several ASUS® Z270 motherboards. The monoblock is equipped with a 4-pin RGB LED strip and it offers unparallel aesthetics alongside with superior performance! The RGB LED in the monoblock is compatible with ASUS® Aura Sync which offers a full lighting customization experience!


Asus aura

Details

EK-FB ASUS Z270E Strix RGB Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for Intel® LGA-1151 socket Kaby Lake® and Sky Lake® CPU's. This monoblock is compatible with the following ASUS® motherboards:

  • ROG STRIX Z270E GAMING
  • ROG STRIX Z270G GAMING
  • ROG STRIX Z270F GAMING
  • PRIME Z270-A

 EK-FB ASUS Z270E Strix RGB

Designed and engineered in cooperation with ASUS®, this monoblock uses award-winning EK-Supremacy EVO cooling engine to ensure best possible CPU cooling. This water block directly cools Intel LGA-1151 socket type CPU and the power regulation (MOSFET) module as water flows directly over all critical areas. It is a very high flow water block that can be easily used with the system using weaker water pumps.

 Strix Logo

The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass material. The nickel plated brass screw-in standoffs are pre-installed and allow for easy installation.

The monoblock is equipped with a 4-pin RGB LED strip that connects to the motherboard's 4-pin LED header (if supported) or it can be connected to any other 4-pin LED controller. The LED strip cover can easily be removed for adjusting the cable orientation or replacing the LED strip with a custom solution as well!

Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation.

The enclosed thermal pad is used on voltage regulator modules to improve stability, performance and prolongs the lifespan of the motherboard. For the CPU, please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm.

Enclosed:
- EK-FB ASUS Z270E Strix RGB Monoblock - Nickel water block
- Mounting mechanism
- Thermal grease EK-TIM Ectotherm
- Thermal pads

Made in Slovenia - Europe!

PLEASE NOTE:

  • Fittings are not included! Two fittings are required for proper operation. Due to the immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
  • For every supported ASUS® Z270 motherboard, the stock I/O cover is compatible with this EK monoblock.
  • This EK monoblock will not interfere with M.2 Connectors on any of the supported ASUS Z270 motherboards.
  • The built-in 4-pin LED strip is compatible with any 12V LED RGB controller.

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Sockets Intel

 

追加情報

EK Water Blocks

タグ

添付ファイル

インストールマニュアル (EK-FB_ASUS_Z270E_Strix.pdf, 1,121 Kb) [ダウンロード]

友達に知らせる

画像に表示されている英数字を入力してください。



休業日・・・休業日

ロード中...