EK-FB MSI X299 GAMING PRO CARBON RGB Monoblock - Nickel
  • EK-FB MSI X299 GAMING PRO CARBON RGB Monoblock - Nickel

EK-FB MSI X299 GAMING PRO CARBON RGB Monoblock - Nickel

型番: WBE1006

16,916 

(18,269  税込)
3 個

説明

チップセット用水枕

MSI製 Intel X299 Chipset based motherboard専用の水枕(CPUクーラー込)
Intel Core X-Series LGA-2066ソケット

  • MSI X299 GAMING PRO CARBON AC
  • MSI X299 GAMING PRO CARBON
  • MSI X299 GAMING M7 ACK

銅製ベースプレート(ニッケル仕上げ)・アクリル樹脂製トッププレート

フィッティングは別売りとなっております

接続口:G1/4

互換性チェック

インストラクションマニュアル

 

特記事項
EK Waterblocks製Full Cover水枕にてベースプレート側の取り付けねじ穴が緩かったり位置がすれている等の場合は固定ネジを無理にねじ込まないで直ぐに当店へご連絡下さい、 無理にねじ込んだ結果ねじ穴のメッキが剥がれた場合はねじ穴不良のメーカー保証が無くなります(メーカはメッキが剥がれた事で無理にねじ込んだと判断して います、当店でも保証致しかねます)。装着前にまず規定のネジがスムーズにねじ込めるかを確認の後に装着作業を始めて下さいます様お願い致します。

フルカーバー水枕は各機種ごとに個別に設計されていますがリファレンス基盤の標準的な配置を元に製造設計されております。
これは固定ネジの配置や各チップの位置が同じと言うだけでありチップキャパシタやチップレジスターは製造ロットによって採用しているチップパーツが違い、高さなどが微妙に異なる可能性がありチップパーツが水枕に接触する可能性があります。
従いましてFull Cover水枕を被対象物に装着する時には不必要な箇所の接触が無いかを必ず確認して下さい、接触が有る場合はその部分を削ったり絶縁材を挟む必要がございますので予めご了承下さい。

EAN: 3830046992727

 

EK-FB MSI X299 GAMING PRO CARBON RGB Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for MSI® X299 motherboards (MSI X299 GAMING PRO CARBON AC, MSI X299 GAMING PRO CARBON AC, MSI X299 GAMING M7 ACK).

Details

This is a complete all-in-one (CPU and motherboard) liquid cooling solution for three MSI® Intel® X299 Chipset based motherboards that support new Intel® Core X-series LGA-2066 socket processors. This monoblock is compatible with the following MSI® motherboards:

  • MSI X299 GAMING PRO CARBON AC
  • MSI X299 GAMING PRO CARBON
  • MSI X299 GAMING M7 ACK

 

EK-FB MSI X299 GAMING PRO CARBON Monoblock - Ni

Designed and engineered in cooperation with MSI®, this monoblock uses award-winning EK-Supremacy EVO cooling engine to ensure best possible CPU cooling. This water block directly cools Intel® LGA-2066 socket type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, MSI X299 GAMING PRO CARBON RGB features high flow design and this monoblock can be easily used with the system using a weaker water pump as well.  This kind of efficient VRM cooling on an X299 platform additionally brings down the CPU temperatures compared to the traditional CPU water block and stock VRM heatsink cooling solution.

X299 VRM COOLING

This X299 platform based monoblock also comes with a new redesigned cold plate. The new design ensures that the monoblock has better mechanical contact with the IHS of Intel® Core X-series LGA-2066 socket based processors, thus enabling better thermal transfer.

The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass material. The nickel plated brass screw-in standoffs are pre-installed and allow for easy installation.

MSI Mystic Light

The monoblock is equipped with a 4-pin RGB LED strip that connects to the motherboard's 4-pin LED header (if supported) or it can be connected to any other 4-pin LED controller. The LED strip cover can easily be removed for adjusting the cable orientation or replacing the LED strip with a custom solution as well!

Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation.

The enclosed thermal pad is used on voltage regulator modules to improve cooling performance of the water block. For the CPU please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm.

Enclosed: 
- EK-FB MSI X299 Monoblock
- Mounting mechanism
- Thermal grease EK-TIM Ectotherm
- Thermal pads

Made in Slovenia - Europe!

PLEASE NOTE:

  • Fittings are not included! Two fittings are required for proper operation. Due to the immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
  • The built-in 4-pin LED strip is compatible with any 12V LED RGB controller.
  • This product should NOT be installed with any aluminum Fluid Gaming parts!

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4

 

追加情報

EK Water Blocks

タグ

添付ファイル

インストールマニュアル (EK-IM-3830046992727.pdf, 1,067 Kb) [ダウンロード]

友達に知らせる

画像に表示されている英数字を入力してください。



休業日・・・休業日

ロード中...