EK-FB ASRock X299 RGB Monoblock - Nickel
  • EK-FB ASRock X299 RGB Monoblock - Nickel

EK-FB ASRock X299 RGB Monoblock - Nickel

型番: WBE1013

16,449 

(17,765  税込)

在庫切れ

説明

チップセット用水枕

ASRock製 X299 motherboard専用の水枕(CPUクーラー込)

ASRock X299 OC Formula
ASRock X299 Taichi
ASRock X299 Taichi XE
ASRock Fatal1ty X299 Professional Gaming i9
ASRock Fatal1ty X299 Professional Gaming i9 XE
ASRock X299 Killer SLI/ac
ASRock Fatal1ty X299 Gaming K6 

銅製ベースプレート(ニッケル仕上げ)・アクリル樹脂製トッププレート

フィッティングは別売りとなっております

接続口:G1/4

互換性チェック

 

特記事項
EK Waterblocks製Full Cover水枕にてベースプレート側の取り付けねじ穴が緩かったり位置がすれている等の場合は固定ネジを無理にねじ込まないで直ぐに当店へご連絡下さい、 無理にねじ込んだ結果ねじ穴のメッキが剥がれた場合はねじ穴不良のメーカー保証が無くなります(メーカはメッキが剥がれた事で無理にねじ込んだと判断して います、当店でも保証致しかねます)。装着前にまず規定のネジがスムーズにねじ込めるかを確認の後に装着作業を始めて下さいます様お願い致します。

フルカーバー水枕は各機種ごとに個別に設計されていますがリファレンス基盤の標準的な配置を元に製造設計されております。
これは固定ネジの配置や各チップの位置が同じと言うだけでありチップキャパシタやチップレジスターは製造ロットによって採用しているチップパーツが違い、高さなどが微妙に異なる可能性がありチップパーツが水枕に接触する可能性があります。
従いましてFull Cover水枕を被対象物に装着する時には不必要な箇所の接触が無いかを必ず確認して下さい、接触が有る場合はその部分を削ったり絶縁材を挟む必要がございますので予めご了承下さい。

EAN: 3830046994714
EK-FB ASRock X299 RGB Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for several ASRock X299 based motherboards.

Details

EK-FB ASRock X299 RGB Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for several ASRock® Intel® X299 Chipset based motherboards that support new Intel® Core X-series LGA-2066 socket processors. This monoblock is compatible with the following ASRock® motherboards:

  • ASRock X299 OC Formula
  • ASRock X299 Taichi
  • ASRock X299 Taichi XE
  • ASRock Fatal1ty X299 Professional Gaming i9
  • ASRock Fatal1ty X299 Professional Gaming i9 XE
  • ASRock X299 Killer SLI/ac
  • ASRock Fatal1ty X299 Gaming K6

 

EK-FB ASRock X299 RGB Monoblock

Designed and engineered in cooperation with ASRock®, these monoblocks use the award-winning EK-Supremacy EVO cooling engine to ensure best possible CPU cooling. These water blocks directly cool the Intel® LGA-2066 socket type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. The base of the monoblocks is made of nickel-plated electrolytic copper while the top is made out of acrylic glass material.

Like with every EK monoblock, EK-FB ASRock X299 RGB features high flow design and it can be easily used with weaker pumps or silent water pump settings as well. This kind of efficient VRM cooling on an X299 platform additionally brings down the CPU temperatures compared to the traditional CPU water block and stock VRM heatsink cooling solution.

The monoblock comes with a new redesigned cold plate which is becoming a standard feature on all X299 based EK monoblocks. The design ensures that the monoblocks have better mechanical contact with the IHS of Intel® Core X-series LGA-2066 socket based processors, thus enabling better thermal transfer. The nickel plated brass screw-in standoffs are pre-installed and allow for easy installation. 

The monoblock is equipped with a 4-pin RGB LED strip that connects to the motherboard’s 4-pin LED header or it can be connected to any other 4-pin LED controller. The LED strip cover can easily be removed to adjust the cable orientation or replacing the LED strip with a custom solution as well!

ASRock RGB LED Sync

Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation.

The enclosed thermal pad is used on voltage regulator modules to improve cooling performance of the water block. For the CPU please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm.

Enclosed: 
EK-FB ASRock X299 RGB Monoblock
- Mounting mechanism
- Thermal grease EK-TIM Ectotherm
- Thermal pads

Made in Slovenia - Europe!

PLEASE NOTE:

  • Fittings are not included! Two fittings are required for proper operation. Due to the immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
  • The built-in 4-pin LED strip is compatible with any 12V LED RGB controller.
  • Fittings are just for showcase and are not included!
  • The monoblock is compatible with the stock motherboard I/O cover
  • This product should NOT be installed with any aluminum Fluid Gaming parts!

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Sockets Intel

 

追加情報

EK Water Blocks

タグ

友達に知らせる

画像に表示されている英数字を入力してください。



休業日・・・休業日

ロード中...