EK-FB GA X399 GAMING RGB Monoblock - Nickel
  • EK-FB GA X399 GAMING RGB Monoblock - Nickel

EK-FB GA X399 GAMING RGB Monoblock - Nickel

型番: WBE1017

18,058 

(19,503  税込)
1 個

説明

チップセット用水枕

GIGABYTE製 X399 motherboard専用の水枕(CPUクーラー込)

  • GIGABYTE X399 Aorus Gaming 7 (rev.1.0)
  • GIGABYTE X399 Designare EX (rev.1.0)

銅製ベースプレート(ニッケル仕上げ)・アクリル樹脂製トッププレート

フィッティングは別売りとなっております

接続口:G1/4

互換性チェック

 

特記事項
EK Waterblocks製Full Cover水枕にてベースプレート側の取り付けねじ穴が緩かったり位置がすれている等の場合は固定ネジを無理にねじ込まないで直ぐに当店へご連絡下さい、 無理にねじ込んだ結果ねじ穴のメッキが剥がれた場合はねじ穴不良のメーカー保証が無くなります(メーカはメッキが剥がれた事で無理にねじ込んだと判断して います、当店でも保証致しかねます)。装着前にまず規定のネジがスムーズにねじ込めるかを確認の後に装着作業を始めて下さいます様お願い致します。

フルカーバー水枕は各機種ごとに個別に設計されていますがリファレンス基盤の標準的な配置を元に製造設計されております。
これは固定ネジの配置や各チップの位置が同じと言うだけでありチップキャパシタやチップレジスターは製造ロットによって採用しているチップパーツが違い、高さなどが微妙に異なる可能性がありチップパーツが水枕に接触する可能性があります。
従いましてFull Cover水枕を被対象物に装着する時には不必要な箇所の接触が無いかを必ず確認して下さい、接触が有る場合はその部分を削ったり絶縁材を挟む必要がございますので予めご了承下さい。

Product EAN:
3830046994608

 

EK-FB GA X399 GAMING RGB Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for several GIGABYTE® X399 motherboards.

 

 

Details

EK-FB GA X399 GAMING RGB Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for two GIGABYTE® AMD® X399 Chipset based motherboards that support AMD Socket TR4 AMD Ryzen™ Threadripper™ processors. This monoblock is compatible with the following GIGABYTE® motherboards:  

  • GIGABYTE X399 Aorus Gaming 7 (rev.1.0)
  • GIGABYTE X399 Designare EX (rev.1.0)

 

Designed and engineered in cooperation with GIGABYTE®, this monoblock uses a completely new cooling engine that ensures excellent CPU cooling performance. This water block directly cools the AMD® Socket TR4 type CPU, as well as the power regulation module (VRM). Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks.

EK-FB GA X399 Gaming RGB Monoblock

This X399 platform based monoblock features a redesigned cold plate with a fin area that covers most of the Ryzen™ Threadripper™ IHS surface. The design also ensures that the monoblock cold plate is covering the entire Ryzen™ Threadripper™ processor IHS, thus enabling better thermal transfer. The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass material. The main nickel plated mounting screws and brass screw-in standoffs are pre-installed so that the installation process is quick and easy.

Gigabyte Fusion

The monoblock is equipped with a Digital RGB LED strip that connects to the dedicated 3-pin digital LED header. GIGABYTE® X399 series motherboards boast the most advanced LED system in the market today and with the GIGABYTE RGB Fusion App, users can individually address color to each LED on the monoblocks integrated Digital LED strip. The LED strip cover can easily be removed for adjusting the cable orientation or replacing the Digital LED strip with an ordinary LED strip or any other custom solution as well! Another, standard 4-pin 12V RGB LED strip is included in the box that can connect to the motherboard's 4-pin LED header or it can be connected to any other standard 12V 4-pin LED controller.

Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation.

The enclosed thermal pad is used on voltage regulator modules to improve cooling performance of the water block. For the CPU please use the enclosed (electrically non-conductive) high-performance thermal grease Thermal Grizzly Hydronaut. The additional passive heatsink is used for the VRM and network chip components placed between the I/O shield and the memory DIMM slots.

Enclosed: 
- EK-FB GA X399 GAMING RGB Monoblock
- Passive heatsink
- 4-pin 12V RGB LED strip
- Mounting mechanism
Thermal grease: Thermal Grizzly Hydronaut 1g
- Thermal pads

Made in Slovenia - Europe!

PLEASE NOTE:

  • The built-in 3pin Digital LED strip is compatible only with the onboard 3-pin 5V digital LED header.
  • The included 4-pin LED strip is compatible with any 12V LED RGB controller.
  • Fittings are just for showcase and are not included!
  • Make sure you install the additional passive heatsink according to the installation manual!
  • This product should NOT be installed with any aluminum EK Fluid Gaming parts!

 

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Sockets AMD

 

追加情報

EK Water Blocks

タグ

添付ファイル

インストールマニュアル (EK-IM-3830046994455.pdf, 1,515 Kb) [ダウンロード]

友達に知らせる

画像に表示されている英数字を入力してください。



休業日・・・休業日

ロード中...