EK-FB GA X470 Gaming 5 RGB Monoblock - Nickel
  • EK-FB GA X470 Gaming 5 RGB Monoblock - Nickel

EK-FB GA X470 Gaming 5 RGB Monoblock - Nickel

型番: WBE1022

18,620 

(20,110  税込)
4 個

説明

チップセット用水枕

GIGABYTE製  X470 AORUS GAMING 5 WIFI専用の水枕(CPUクーラー込)

銅製ベースプレート(ニッケル仕上げ)・アクリル樹脂製トッププレート

フィッティングは別売りとなっております

接続口:G1/4

互換性チェック

特記事項
EK Waterblocks製Full Cover水枕にてベースプレート側の取り付けねじ穴が緩かったり位置がすれている等の場合は固定ネジを無理にねじ込まないで直ぐに当店へご連絡下さい、 無理にねじ込んだ結果ねじ穴のメッキが剥がれた場合はねじ穴不良のメーカー保証が無くなります(メーカはメッキが剥がれた事で無理にねじ込んだと判断して います、当店でも保証致しかねます)。装着前にまず規定のネジがスムーズにねじ込めるかを確認の後に装着作業を始めて下さいます様お願い致します。

フルカーバー水枕は各機種ごとに個別に設計されていますがリファレンス基盤の標準的な配置を元に製造設計されております。
これは固定ネジの配置や各チップの位置が同じと言うだけでありチップキャパシタやチップレジスターは製造ロットによって採用しているチップパーツが違い、高さなどが微妙に異なる可能性がありチップパーツが水枕に接触する可能性があります。
従いましてFull Cover水枕を被対象物に装着する時には不必要な箇所の接触が無いかを必ず確認して下さい、接触が有る場合はその部分を削ったり絶縁材を挟む必要がございますので予めご了承下さい。

Product EAN:
3830046998187
 
EK-FB GA X470 Gaming 5 RGB Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for the GIGABYTER X470 AORUS GAMING 5 WIFI motherboard. The monoblock is equipped with a 4-pin RGB LED strip and it offers unparallel aesthetics alongside with superior performance! The RGB LED in the monoblock is compatible with GIGABYTER RGB Fusion, thus offering a full lighting customization experience! The monoblock also delivered with a digital LED strip which the user can swap out with ease.
 

Details

This is a complete all-in-one (CPU and motherboard) liquid cooling solution for the X470 AORUS GAMING 5 WIFI socket AM4 motherboard that supports the second generation of AMD® Ryzen™ and 7th Generation A-series/Athlon™ processors.

EK-FB GA X470 Gaming 5 RGB

Designed and engineered in cooperation with GIGABYTE®, this monoblock uses award-winning EK-Supremacy EVO cooling engine to ensure best possible CPU cooling. This water block directly cools AMD® AM4 socket type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, EK-FB GA X470 Gaming 5 features high flow design and it can be easily used with the system using a weaker water pump or lower pump speed settings as well.

This AM4 socket based monoblock also comes with a special cold plate which ensures that the monoblock has better mechanical contact with the IHS of AMD® AM4 socket based processors, thus enabling better thermal transfer.

The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass material. The nickel plated brass screw-in standoffs are pre-installed and allow for easy installation.

GIGABYTE FUSION

A standard 4-pin 12V RGB LED strip is installed in the monoblock that connects to the motherboard's 4-pin LED header or it can be connected to any other standard 12V 4-pin LED controller. The LED strip cover can easily be removed for adjusting the cable orientation or replacing the ordinary LED strip with a Digital LED strip or any other custom solution as well! The enclosed Digital RGB LED strip is compatible only with the dedicated 3-pin digital LED motherboard header. GIGABYTE® motherboards feature advanced LED lighting options and with the GIGABYTE RGB Fusion App, users can individually address color to each LED on the monoblocks integrated Digital LED strip. 

Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation.

The enclosed thermal pad is used on voltage regulator modules to improve stability, performance and prolongs the lifespan of the motherboard. For the CPU, please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm.

Enclosed: 
- EK-FB GA X470 Gaming 5 RGB Monoblock - Nickel water block
- Mounting mechanism
- Thermal grease EK-TIM Ectotherm
- Thermal pads
- Backplate

Made in Slovenia - Europe!

PLEASE NOTE:

  • Fittings are not included!
  • Two fittings are required for proper operation. Due to the immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
  • The stock I/O cover is compatible with this EK monoblock.
  • The built-in 4-pin LED strip is compatible with any 12V LED RGB controller.
  • The included  3pin Digital LED strip is compatible only with the onboard 3-pin 5V digital LED header.
  • This product should NOT be installed with any aluminum Fluid Gaming parts!

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Sockets AMD

 

追加情報

EK Water Blocks

タグ

友達に知らせる

画像に表示されている英数字を入力してください。



休業日・・・休業日

ロード中...