EK-Torque HTC-16 - Black

EK-Torque HTC-16 - Black

型番: FTG927-HTC16B

881 

(969  税込)
162 個

説明

G1/4 雄ネジ ストレート OD16mm ハードチューブ用継手
真鍮電解ブラックメッキ製
Made with care in EU

Product EAN:3831109815977

Details
EK-Torque HTC 16 fittings are EK's new minimalistic 16mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.

The locking ring prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring. The grooves on the outside allow for easier hand tightening. The compression ring has cutouts in EK Quantum signature shape allowing for the colored aesthetic ring to be shown. The colored rings are available in many colors and are screwed onto the fitting before the compression locking ring. The aesthetic rings are sold separately.

The fitting barb and the compression rings are covered with a unique, high-quality satin black finish. Both are made of CNC machined brass and the seal is made quality rubber O-rings. Black EK-Torque series fittings are intentionally not painted on the inside to reduce the level of possible pollutants in the loop.

The base fitting surface is smooth and has no adequate gripping surface, but the inside of the barb is socketed with a 9mm hex Allen key pattern. It's highly recommended to use an Allen Key 9mm (purchased separately) to prevent skin damage to the fingertips while installing the fitting. Please, be advised not to use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent damage to other liquid cooling products!

These fittings are guaranteed to be compatible with all other EK Water Blocks liquid cooling products.

Technical data:
- Finish: Satin black
- Thread: G1/4" BSP; 4.5mm male thread length
- Supported tube: 16mm OD
- The outer diameter of a fitting: 24mm
- Installed height: 15mm
- Compatible solid tubing: Acrylic, PETG, Copper, Brass, Stainless Steel

Made in Europe - Slovenia!

PLEASE NOTE:
Please wet the gasket (o-ring) using drops of water prior to installing the solid tube.
Do not use excessive force when inserting solid tube!
Do not use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent damage!
It is mandatory to use a chamfer tool on the edges of the freshly cut solid tube in order to prevent gasket (o-ring) damage.
This product should NOT be installed with any aluminum Fluid Gaming parts!
EK strongly recommends the use of PETG inserts with the use of PETG tubes.
The aesthetic rings are sold separately.

チューブをフィッティングに挿入する前に、水でOリングを濡らしてください(潤滑)。
チューブを挿入する時に過度の力を加えないでください
アレンキー9mmを使用してフィッティングを締め付ける時に過度の力を加えないで下さい!
Oリングの損傷を防ぐ為、切断したソリッドチューブの端面は面取りツールを使用してバリ取りをして下さい。
アルミニウム製水冷部品を混在して取り付けないでください!
PETGチューブを使用する時にはチューブ端のつぶれを防ぐ為にPETGインサートを使用することを強く推奨します。

Additional Info
Threads G1/4


価格は1個単位ですのでご注意下さい。

追加情報

EK Water Blocks

タグ

友達に知らせる

画像に表示されている英数字を入力してください。



休業日・・・休業日

ロード中...