EK-Quantum Momentum ROG Crosshair VIII Hero D-RGB - Plexi
  • EK-Quantum Momentum ROG Crosshair VIII Hero D-RGB - Plexi

EK-Quantum Momentum ROG Crosshair VIII Hero D-RGB - Plexi

型番: WBE1035

18,392 

(20,231  税込)
3 個

説明

ASUS ROG Crosshair VIII Hero専用のフルカバー水枕(CPU込み)
 
銅製ベースプレート(ニッケル仕上げ)・アクリル樹脂製トッププレート
 
フィッティングは別売りとなっております
 
接続口:G1/4
 
 
特記事項
EK Waterblocks製Full Cover水枕にてベースプレート側の取り付けねじ穴が緩かったり位置がすれている等の場合は固定ネジを無理にねじ込まないで直ぐに当店へご連絡下さい、 無理にねじ込んだ結果ねじ穴のメッキが剥がれた場合はねじ穴不良のメーカー保証が無くなります(メーカはメッキが剥がれた事で無理にねじ込んだと判断して います、当店でも保証致しかねます)。装着前にまず規定のネジがスムーズにねじ込めるかを確認の後に装着作業を始めて下さいます様お願い致します。
 
フルカーバー水枕は各機種ごとに個別に設計されていますがリファレンス基盤の標準的な配置を元に製造設計されております。
これは固定ネジの配置や各チップの位置が同じと言うだけでありチップキャパシタやチップレジスターは製造ロットによって採用しているチップパーツが違い、高さなどが微妙に異なる可能性がありチップパーツが水枕に接触する可能性があります。
従いましてFull Cover水枕を被対象物に装着する時には不必要な箇所の接触が無いかを必ず確認して下さい、接触が有る場合はその部分を削ったり絶縁材を挟む必要がございますので予めご了承下さい。
 
Product EAN:3831109819203
 
EK-Quantum Momentum ROG Crosshair VIII Hero D-RGB is a Quantum Line monoblock specially designed for the ROG Crosshair VIII Hero motherboard, featuring the latest cooling engine with low restriction and high performance. The monoblock is equipped with a 3-pin D-RGB (Addressable) LED strip. The D-RGB LED in the monoblock is compatible with ASUSR Aura Sync which offers a full lighting customization experience!
 
EKR Quantum - Design & Performance
 
Momentum series monoblocks are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!
 
For more information, check out: www.ekwb.com/quantum
 

Details

EK-Quantum Momentum ROG Crosshair VIII Hero D-RGB is a Quantum Line monoblock specially designed for the ROG Crosshair VIII Hero motherboard, featuring the latest cooling engine with low restriction and high performance. This is a complete all-in-one (CPU and motherboard) liquid cooling solution for Ryzen AMD processors. The monoblock is compatible with the X570 based ROG Crosshair VIII Hero motherboard.

EK-Quantum Momentum ROG Crosshair VIII Hero

This monoblock uses the latest generation of EK cooling engine used on the Quantum lineup to ensure the best possible CPU cooling while not reducing flow to other components. This water block directly cools the AM4 socket type CPU, as well as the voltage regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, EK-Quantum Momentum ROG Crosshair VIII Hero D-RGB features high flow design and it can be easily used with the system using a weaker water pump or lower pump speed settings as well. The Momentum monoblock also comes with sophisticated D-RGB (addressable) lightning which connects to a standard 3-pin 5V D-RGB header.

The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass material. The nickel-plated brass screw-in standoffs are pre-installed and allow for easy installation.

EK-Momentum ROG Crosshair VIII Hero D-RGB monoblock

Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation. The enclosed thermal pad is used on voltage regulator modules to improve stability, performance and prolongs the lifespan of the motherboard. For the CPU, please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm.

Asus aura

This product is compatible with ASUS Aura Sync RGB control software. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the addressable gen2 LED header (ADD GEN2_1 and ADD GEN2_2 marked headers).

Technical specifications:
- RGB connector 3-pin 5V digital LED header (Pinout: +5V, D, Blocked, Ground)

Enclosed:
- EK-Quantum Momentum ROG Crosshair VIII Hero D-RGB Monoblock
- Mounting mechanism
- Thermal grease EK-TIM Ectotherm
- Thermal pads
- Backplate

Made in Slovenia - Europe!

PLEASE NOTE:

  • The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel plated water block! EK is offering a selection of such products in the coolants section.
  • This product should NOT be installed with any aluminum EK Fluid Gaming parts!
  • Fittings are not included! Two fittings are required for proper operation. Due to the immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
  • Using delidded CPUs with monoblocks is not recommended as it can lead to poor cooling contact and performance.
  • The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB(A-RGB) header.

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Sockets AMD

 

追加情報

EK Water Blocks

タグ

添付ファイル

インストレーションマニュアル (EK-IM-3831109819203.pdf, 2,113 Kb) [ダウンロード]

友達に知らせる

画像に表示されている英数字を入力してください。



休業日・・・休業日

ロード中...