Noctua NF-A4x10 PWM
  • Noctua NF-A4x10 PWM

Noctua NF-A4x10 PWM

型番: FAN202

1,389 

(1,528  税込)
31 個

説明

Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A4x10 is an award-winning, premium-quality quiet fan in size 40x10mm. The PWM version sports Noctua’s custom-designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise Adaptor as well as an OmniJoin Adaptor Set for easy connection to proprietary fan headers. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands.

NF-A4x10は、フローアクセラレーションチャネルやNoctuaのAAOフレームなどの高度な空力設計手段を備え、40x10mmサイズの受賞歴のある高品質の静音ファンです。 PWMバージョンには、Noctuaのカスタム設計NE-FD1 ICが搭載されており、4ピンファンヘッダーを介した完全自動速度制御が可能です。独自のファンヘッダーに簡単に接続できる低ノイズアダプターとOmniJoinアダプターセットが付属しています。 その卓越した滑らかさ、リファレンスクラスのSSO2ベアリング、Noctuaの信頼できるプレミアム品質により、最高の要求に応えるエリートの選択肢となっています。

Details
 
Award-winning NF-A4x10 design

Award-winning NF-A4x10 design

Having received more than 50 awards and recommendations from the international press, Noctua’s NF-A4x10 has become a proven premium choice for 40mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.
Reduced motor hub size

Reduced motor hub size

Thanks to its streamlined, compact motor design, the NF-A4x10's motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10's superior airflow and pressure performance.
Flow Acceleration Channels

Flow Acceleration Channels

The NF-A4x10 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.
AAO frame

AAO frame

Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency.
Stepped Inlet Design

Stepped Inlet Design

Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.
Inner Surface Microstructures

Inner Surface Microstructures

With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.
Integrated Anti-Vibration Pads

Integrated Anti-Vibration Pads

Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.
Custom-designed PWM IC with SCD

Custom-designed PWM IC with SCD

Supporting fully automatic PWM speed control, the NF-A4x10 PWM uses Noctua's novel, custom-designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. By providing smoother torque impulses, SCD suppresses PWM switching noises and thus makes the fan quieter at lower speeds.
Stops at 0% PWM

Stops at 0% PWM

When the fan is set to 0% PWM duty cycle by the motherboard or PWM fan controller, it will stop. This makes it ideal for creating setups with semi-passive cooling that automatically turn the fans off and thus run completely silent at idle if thermals allow.
SSO2 Bearing

SSO2 Bearing

The NF-A4x10 features the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.
Low-Noise Adaptor

Low-Noise Adaptor

The NF-A4x10 PWM is supplied with a Low-Noise Adaptor (L.N.A.) that reduces the maximum fan speed from 5000 to 3700rpm. The L.N.A. can be used either to run the fan at a fixed speed of 3700rpm or to cap the maximum speed when using automatic PWM control.
OmniJoin™ Adaptor Set

OmniJoin™ Adaptor Set

Many devices featuring 40mm fans use proprietary fan headers, so the NF-A4x10 comes with Noctua's OmniJoin™ adaptor set. Just cut the original fan's cable, fix it to the adaptor using the supplied 3M Scotchlok™ connectors and you can plug the NF-A4x10 to proprietary fan headers!
Extensive cabling options

Extensive cabling options

The fan's short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows the connection of a second fan to the same PWM fan header for automatic control.
6-year manufacturer’s warranty

6-year manufacturer’s warranty

Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A4x10 features an MTTF of more than 150.000 hours rating and comes with a full 6-year manufacturer's warranty.

 

FAN Specification
 
Size
40x40x10 mm
Mounting hole spacing
32x32 mm
Cable length
20cm + 30cm NA-EC1 extension cable
Bearing
Blade geometry
Rotational speed (+/- 10%)
5000 RPM
Rotational speed with L.N.A. (+/- 10%)
3700 RPM
Min. rotational speed (PWM, +/-20%)
1000 RPM
Acoustical noise
19,6 dB(A)
Acoustical noise with L.N.A.
12,9 dB(A)
Static pressure
1,95 mm H₂O
Static pressure with L.N.A.
1,21 mm H₂O
Max. input power
0,48 W
Max. input current
0,04 A
Operating voltage
12 V
MTTF
> 150.000 h
Scope of delivery
  • 30cm Extension Cable
  • NA-AV3 anti-vibration mounts
  • OmniJoin Adaptor Set
  • 4-pin y-cable
  • Low-Noise Adaptor (L.N.A.)
  • 4 Fan Screws
6 years

 

追加情報

Noctua

タグ

友達に知らせる

画像に表示されている英数字を入力してください。



休業日・・・休業日

ロード中...