EK-Quantum Momentum ROG Strix X299-E Gaming II D-RGB - Plexi
  • EK-Quantum Momentum ROG Strix X299-E Gaming II D-RGB - Plexi

EK-Quantum Momentum ROG Strix X299-E Gaming II D-RGB - Plexi

型番: WBE1037

18,526 

(20,379  税込)
5 個

説明

ASUS ROG Strix X-299E Gaming II マザーボード専用のフルカバー水枕(CPU込み)
 
銅製ベースプレート(ニッケル仕上げ)・アクリル樹脂製トッププレート
 
フィッティングは別売りとなっております
 
接続口:G1/4
 
 
特記事項
EK Waterblocks製Full Cover水枕にてベースプレート側の取り付けねじ穴が緩かったり位置がすれている等の場合は固定ネジを無理にねじ込まないで直ぐに当店へご連絡下さい、 無理にねじ込んだ結果ねじ穴のメッキが剥がれた場合はねじ穴不良のメーカー保証が無くなります(メーカはメッキが剥がれた事で無理にねじ込んだと判断して います、当店でも保証致しかねます)。装着前にまず規定のネジがスムーズにねじ込めるかを確認の後に装着作業を始めて下さいます様お願い致します。
 
フルカーバー水枕は各機種ごとに個別に設計されていますがリファレンス基盤の標準的な配置を元に製造設計されております。
これは固定ネジの配置や各チップの位置が同じと言うだけでありチップキャパシタやチップレジスターは製造ロットによって採用しているチップパーツが違い、高さなどが微妙に異なる可能性がありチップパーツが水枕に接触する可能性があります。
従いましてFull Cover水枕を被対象物に装着する時には不必要な箇所の接触が無いかを必ず確認して下さい、接触が有る場合はその部分を削ったり絶縁材を挟む必要がございますので予めご了承下さい。
 

Details

EK-Quantum Momentum ROG Strix X299-E Gaming II D-RGB is the new Quantum Line monoblock specifically engineered for the ROG Strix X299-E Gaming II motherboard. Featuring the latest cooling engine with low restriction and high performance. The monoblock is equipped with a 3-pin D-RGB (addressable) LED strip and it offers unparallel aesthetical customization alongside superior performance! The RGB LED in the monoblock is compatible with ASUS® Aura Sync which offers a full lighting customization experience!

EK® Momentum series monoblocks utilize the 5th generation of the award-winning EK® CPU water block cooling engine, further tweaked for performance and optimal coolant flow! This water block directly cools Intel® 1151 socket type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, the EK-Quantum Momentum ROG Strix X299-E Gaming II features a high flow design and it can be easily used with the system using weaker water pump or lower pump speed settings as well. The Momentum monoblock also comes with sophisticated addressable D-RGB lightning which connects to a standard 3-pin 5V D-RGB header.

EK-Quantum Momentum ROG Strix X299-E Gaming II D-RGB

The purest nickel-plated copper available on the market is used for the cold plate which is precisely machined to a dense micro-fin structure. The nickel-plated brass screw-in standoffs are pre-installed and allow for easy installation. Top of the monoblock features a CNC machined glass-like acrylic top piece.

The new cooling engine is characterized by the top-integrated jet nozzle which is combined with a thicker jet plate allowing a more precise bow control. The simplified water block structure offers a more optimized coolant flow and easier maintenance, while the jet plate ensures the best contact surface for the CPU.

Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation. The enclosed thermal pad is used on voltage regulator modules to improve stability, performance and prolongs the lifespan of the motherboard. For the CPU, please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm.

Asus aura

The block is already equipped with 3-pin 5V Addressable D-RGB LED strip which is compatible with the motherboard 3-pin 5V Addressable D-RGB LED header. This product is also compatible with popular RGB sync technologies from all major motherboard manufacturers which support the pinout: +5V, D, Blocked, Ground. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the addressable gen2 LED header (ADD GEN2_1 and ADD GEN2_2 marked headers).

Technical specifications:
- RGB connector 3-pin 5V digital LED header (Pinout: +5V, D, blocked, G)

Enclosed:
EK-Quantum Momentum ROG Strix X299-E Gaming II Monoblock
- Mounting mechanism
- Thermal grease EK-TIM Ectotherm
- Thermal pads

Made in Slovenia - Europe!

PLEASE NOTE:

  • The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel-plated water block! EK is offering a selection of such products in the coolants section.
  • This product should NOT be installed with any aluminum EK Fluid Gaming parts!
  • Fittings are not included! Two fittings are required for proper operation. Due to the immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
  • Using delidded CPUs with monoblocks is not recommended as it can lead to poor cooling contact and performance.
  • The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB (A-RGB) header.

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Sockets Intel

 

追加情報

EK Water Blocks

タグ

添付ファイル

インストレーションマニュアル (EK-IM-3831109822173.pdf, 1,104 Kb) [ダウンロード]

友達に知らせる

画像に表示されている英数字を入力してください。



休業日・・・休業日

ロード中...